INCRA 28" x 21" TS Router Table Top with TSRTHW

INCRA 28" x 21" Router Table Tops with TSRTHW - TSRT2821L for Left Side

Rather than the typical router plate leveling set screws that dig into the table's recess requiring constant re-adjustment, INCRA's plate leveling system puts 10 large flat head levelers into the table itself for excellent support. Convenient access to these levelers is through the 10 access holes located around the perimeter of the mounting plate, and after leveling, a simple quarter turn of the corner mounted Cam-Lock securely holds the plate in the router table's recess.

Available in 4 models designed specifically for the INCRA TS-LS and TS-III table saw fence systems. All table saw based router tables include the TS Router Table Support Kit with 4 brackets and 2 table stiffeners. The brackets can be positioned anywhere along the INCRA TS System's rail length and are vertically adjustable.

The 28" x 21" Left-hand table permits maximum fence system range and offers open access from the end of the table saw by sliding the positioner assembly down the rails. For use on saws measuring 27"-28" deep along the miter slot that are equipped with TS-LS or TS-III fence systems.

This table is not compatible with the unique Mast-R-Lift-II-R sold by Rockler, which uses a narrower 8-1/4"-wide top plate.

Router plate size: 9-1/4" x 11-3/4" x 3/8"

Actual table size: 28.580" x 21.080" +/-0.020"

Table thickness: 1.100" +/-0.020"

IMPORTANT: WE ARE OUT OF STOCK OF THE MAGNALOCK PLATE. THIS IS FOR THE TABLE and TSRTHW ONLY.

Heavy/Bulky items, additional shipping charge applies for international orders. Please contact us on 1800 388 833 for a shipping quote.